Lighting control
- To switch the light on or off, the light button must be pressed briefly.
- To dim the light in the room, the light button must be pressed until the desired brightness is reached.
- The lamps save the last dimming setting. If the light is switched off, the lamps start with the last set brightness the next time they are switched on.
Synchronizing the lamps
In rare cases, they lamps may be dimmed differently (e.g. half the lights dim while the other half get brighter). In order to synchronize the lamps again, the light button must be pressed for approximately 15 seconds when the lamps are switched on. The lamps then all all switch to 100% brightness. The lamps can then be dimmed together again.